2-1699-2 Brake for the Embraer Legacy 600/650: -2 vs -3 and Exchange Options
2-1699-2 and 2-1699-3 Goodrich carbon brakes for the Embraer Legacy 600/650 and ERJ: published fitment, CMM, PMA heat stacks and what to check on exchange.
· 4 min read · Aerotex International
The 2-1699-2 brake and its sibling, the 2-1699-3, are Goodrich (now Collins Aerospace) carbon brake assemblies listed for the Embraer Legacy 600 and 650 and for the ERJ-135/145 regional jets the Legacy was developed from. Because the same brake family flies on airline ERJs and on business jets, marketplace searches can return a mix of units, histories and dash numbers. This page sums up what published sources say and what to check before you buy.
Always confirm the dash number for your aircraft serial number in the current Embraer IPC before ordering.
2-1699 brake quick facts
| Item | Published data |
|---|---|
| Part numbers | 2-1699-2, 2-1699-3 (related: 2-1699-1, 2-1699-1 OPT2) |
| Description | Brake assembly, carbon |
| Manufacturer | Goodrich (Collins Aerospace), CAGE 97153 |
| Aircraft | Embraer ERJ-135, ERJ-145, Legacy 600, Legacy 650 (per World Aero) |
| CMM reference (per shop listing) | 32-49-10 (all four dash numbers) |
World Aero describes both the 2-1699-2 and 2-1699-3 as carbon brakes for the ERJ-135, ERJ-145, Legacy 600 and Legacy 650. Its capability list puts 2-1699-1, 2-1699-1 OPT2, 2-1699-2 and 2-1699-3 under the same CMM, 32-49-10. Aeroval’s catalog lists the 2-1699-2 as a “brake assembly” from UTC Goodrich Wheel & Brake. Rotable Repairs also lists the older 2-1582 series brakes on the ERJ-135. Don’t assume those are approved on a Legacy.
For the rest of the Legacy wheel and brake set, see our Embraer Legacy 600/650 Wheel & Brake Part Number Guide, 3-1551 nose wheel and 3-1550 main wheel pages.
2-1699-2 vs 2-1699-3: what’s the difference?
We couldn’t find a published source that explains the technical difference between the -2 and -3. Dash-number changes on brakes often reflect design changes or service bulletin updates, and they aren’t automatically two-way interchangeable. Before accepting one for the other:
- Check the Embraer IPC for your serial number, including interchangeability codes.
- Check applicable Collins/Goodrich component service bulletins.
- Confirm whether your maintenance data requires matched brakes on the same axle or gear.
Heat stack: the cost driver
In a carbon brake, the heat stack (alternating rotating and stationary carbon discs) does the work and takes the wear. C&L Aero estimates the heat stack is typically about 90% of a carbon brake overhaul cost. So when you compare 2-1699 quotes, ask:
- Is the heat stack new, refurbished, or partly worn, and how much wear life remains?
- Is it an OEM or a PMA heat stack?
- What’s the quoted scope: overhaul, repair or inspection/test?
PMA heat stacks
C&L Aero reports that DAC Engineered Products (DAC-EP) makes FAA-PMA carbon heat stacks that can be installed on aircraft with 2-1699-1, -2 or -3 brakes, listing the EMB-135ER, -135KE, -135KL, -145ER and -145EP. The Legacy isn’t named in that list, so don’t assume PMA heat stacks are approved for your Legacy. C&L also notes that not every operator accepts PMA parts.
Wear and flying profile
Carbon brakes wear differently from steel. Boeing’s AERO magazine explains that carbon brake wear depends mainly on the number of brake applications, while steel wear depends on energy absorbed. Light, repeated taxi braking can shorten carbon brake life. Legacy wear-pin limits are in the Embraer AMM. We don’t quote them here. See Carbon vs Steel Business Jet Brakes and Aircraft Brake Wear Pin Inspection Basics.
Buying a 2-1699 brake: airline vs business jet history
- Search the full dash number. “2-1699” alone returns -1, -2 and -3 units.
- Ask about history. Find out whether the unit came from airline ERJ service or a business jet, and ask for the last shop’s work order.
- Check paperwork. An FAA Form 8130-3 for US-released work, plus dual release if needed. The FAA says it documents airworthiness and traceability but isn’t approval to install.
- Compare exchange terms, especially BER and heat stack charges. Duncan Aviation is another source you may come across when shopping for a 2-1699 brake on exchange. See Flat-Rate Exchange Explained and Exchange vs Outright vs Overhaul: Cost Guide.
Frequently asked questions
What aircraft use the 2-1699-2 brake? World Aero lists the ERJ-135, ERJ-145, Legacy 600 and Legacy 650. Confirm in your IPC.
Are 2-1699-2 and 2-1699-3 interchangeable? Don’t assume so. Check the Embraer IPC and Collins service bulletins.
Is the 2-1699-2 a carbon brake? Yes. World Aero describes both the -2 and -3 as carbon brakes.
Can I fit a PMA heat stack to a Legacy 2-1699 brake? PMA heat stacks are approved for several ERJ models. Legacy eligibility needs to be confirmed.
Related reading
- Embraer Legacy 600/650 Wheel & Brake Part Number Guide
- 3-1551 Embraer Legacy Nose Wheel
- 3-1550 Embraer Legacy Main Wheel
- Carbon vs Steel Business Jet Brakes
- Embraer Praetor 500/600 Wheels & Brakes Guide
Request a 2-1699 brake quote or AOG support
Aerotex International lists Embraer Legacy parts on ILSmart and PartsBase.
Taylor Mason, VP of Sales, Aerotex International
Phone: 469-293-3311 · Email: tmason@aerotex.net
For AOG orders, call 469-293-3311 directly.
For reference only. Always confirm part eligibility and procedures against the current IPC/CMM and your maintenance provider. This guide is general information, not regulatory advice. Always follow your approved maintenance data, your quality system and your regulator’s current guidance.
Need a part? Search by part number or send an RFQ.
