Skip to content
Aerotex International logo

Resources / Explainers

Flat-Rate Exchange Explained: How It Works for Aircraft Parts

Flat rate exchange for aircraft parts explained: what the price covers, core return rules, BER charges and how it compares to standard or cost-plus exchange.

· 7 min read · Aerotex International

Picture a business jet with a worn brake or a cracked wheel, and a trip on the schedule tomorrow. Waiting two weeks for an overhaul isn’t an option. So most operators buy rotable parts like wheels, brakes, starters and avionics on exchange: an overhauled unit ships now, and the removed unit goes back to the supplier as a core.

But there are several kinds of exchange, and the differences only show up when the invoice arrives. This guide explains flat rate exchange for aircraft parts: what the price covers, what it doesn’t, and how to read the terms so there are no surprises.

What is a flat-rate exchange?

In a flat-rate exchange, the cost of repairing or overhauling your core is included in the exchange price. You pay one inclusive amount upfront, return an acceptable core, and in most cases that’s the whole bill.

C&L Aerospace describes it simply: “the repair or overhaul cost is included in the exchange fee… you’ll pay a single, inclusive price upfront. Most of the time there will not be an additional bill, except for certain exceptions.” Those exceptions are where the details matter, and we cover them below.

Aerotex International offers flat-rate exchange on many of the parts it sells.

Flat-rate vs standard vs cost-plus exchange

Suppliers usually offer three exchange structures. The table compares them.

Flat-rate exchange Standard exchange Cost-plus exchange
Upfront price Highest of the three exchange types Moderate Lowest
What it includes Unit + repair of your core (within the terms) Unit + a set allowance for routine repair Unit only
Later invoices Usually none, unless core fails the conditions or is BER “Over and above” (O&A) charges if repair exceeds the allowance Actual cost to restore your core
Budget certainty High Medium Low
Best for Planned budgets, fleets that want predictable cost Cores in typical condition Operators who expect a cheap repair, or high-variance parts

The “upfront price” ranking is the typical pattern, since flat-rate pricing has to absorb the repair risk. Actual prices depend on the part and the supplier.

Standard exchange: the fee includes a set “standard” amount toward repair. If the shop finds more work, you pay the difference as over-and-above (O&A) charges. Allaero says its standard exchange pricing “is based on the assumption that the returned core will require routine repair or standard overhaul work,” with extra work invoiced separately.

Cost-plus exchange: you pay a lower exchange fee now and get a second invoice for the full cost of restoring your core, including parts, labor, mandatory modifications and freight.

What a flat-rate exchange usually doesn’t cover

“Flat rate” doesn’t mean “no matter what.” Every supplier lists conditions your core has to meet. The wording differs, but published terms from several suppliers cover the same themes:

  • Same part number (and modification status). The core usually has to match the part number you received. Professional Aviation Associates says the core part number “needs to match exactly,” with exceptions only by written approval.
  • Economically repairable. If the core is beyond economical repair (BER), you’ll owe a core charge on top of the flat rate. Suppliers set the BER threshold differently. Allaero considers a core BER when repair costs exceed 55% of the quoted core charge. Precision Aviation Group’s agreement says additional billing may apply if repair cost exceeds 75% of the flat-rate exchange charge.
  • Complete and undisassembled. Cores that arrive disassembled, opened or already evaluated by another shop are commonly excluded.
  • Intact data plates. Missing, altered or unreadable data plates can disqualify a core.
  • No incident damage. Fire, crash, flood, misuse and mishandling are typically excluded.
  • Life-limited components may need a minimum remaining life.

Read these clauses before you accept the quote. If your core has known damage, a flat-rate exchange may not protect you, and an outright purchase could cost less overall.

Core charges and core return deadlines

Along with the exchange price, you’ll see a core charge on the quote. That’s the amount you owe if you don’t return an acceptable core. It’s usually about the difference between the exchange price and the outright value of the part.

Core return windows differ by supplier, so check yours:

  • Precision Aviation Group’s published agreement asks for cores within 30 calendar days and allows late charges after that.
  • VSE Aviation’s brake exchange program asks for the serviceable core back within 14 days.

Contact us for current core terms on Aerotex exchanges. Late returns can trigger daily fees or the full core charge. Ship the core quickly with its paperwork (removal reason, aircraft hours/cycles if required), and keep the tracking number.

Flat-rate exchange for wheels and brakes

Wheels and brakes are well suited to exchange because they’re rotable, heavy-use and needed at short notice. They’re also among the parts where repair cost varies most. Duncan Aviation is another shop operators may come across when arranging a wheel or brake exchange.

  • Brakes: on carbon brakes, the cost of an overhaul depends mostly on how much heat stack has to be replaced. A flat rate takes that variable off your books.
  • Wheels: a wheel that passes NDT may need only seals and bearings. A wheel with cracks or corrosion beyond CMM limits may be condemned, and then BER terms apply.

So for an aircraft wheel and brake exchange, ask your supplier:

  1. Does the flat rate include the heat stack (for brakes) and the tire (for wheels)?
  2. Is the unit overhauled (OH) or serviceable (SV)? Does the core need to come back in the same condition, or will it be repaired to the condition of the unit you received?
  3. What release paperwork comes with the part (FAA Form 8130-3, dual release)?
  4. What’s the BER threshold, and can you send a replacement core if yours is BER?

For Learjet-specific part numbers, see our Learjet 40/45/75 Wheels & Brakes Guide and the 3-1545-1 main wheel page. For Embraer, see the Legacy 600/650 Wheel & Brake Part Number Guide.

When flat-rate exchange makes sense

Flat-rate exchange tends to suit you when:

  • You need budget certainty. Flight departments and charter operators that budget per flight hour benefit from a fixed cost.
  • Your cores are in normal, as-removed condition. The flat rate assumes typical wear.
  • The part’s repair cost varies a lot. If a repair could be cheap or expensive, the flat rate moves that risk to the supplier.
  • You don’t want admin overhead. One invoice is easier than chasing O&A or cost-plus bills.

It may not be the best fit when:

  • Your core is damaged or has incident history. The exclusions will probably apply.
  • The repair is predictably cheap. A cost-plus exchange could cost less.
  • You don’t have a core at all. An outright purchase is the cleaner choice.

For a full comparison of the money involved, read Exchange vs Outright vs Overhaul: Cost Guide.

A simple flat-rate exchange checklist

Before you sign off on a flat-rate exchange quote, confirm:

  • Part number and dash number match your IPC
  • Condition of the unit you’re receiving (OH, SV, NE)
  • Release paperwork included (8130-3 and dual release if needed)
  • What the flat rate includes (heat stack, tire, bearings)
  • Core charge amount and BER threshold
  • Core return deadline and late fees
  • Who pays freight each way
  • Warranty on the exchange unit
  • Condition requirements for the core (complete, not disassembled, data plate intact)

Frequently asked questions

What does flat rate exchange mean for aircraft parts? You pay one upfront price for a serviceable or overhauled unit, and the repair of your returned core is included, as long as the core meets the supplier’s conditions.

What happens if my core is beyond economical repair? You’ll usually be billed a core charge in addition to the flat rate. Some suppliers let you send a different, repairable core instead within a set deadline.

Is flat-rate exchange cheaper than standard exchange? Not always upfront. Flat-rate prices are usually higher because the supplier carries the repair risk. It can cost less overall if your core would otherwise need expensive work.

How long do I have to return my core? It depends on the supplier. Published examples include 14 days (VSE Aviation’s brake exchange) and 30 calendar days (Precision Aviation Group). Check your quote.

Does my core have to be the same part number? Usually, yes. Most flat-rate programs require an exact part number match unless the supplier approves an exception in writing.

Do flat-rate exchange parts come with an 8130-3? Overhauled parts from US repair stations normally ship with an FAA Form 8130-3. Confirm the paperwork with your supplier before you order.

Related reading

Get a flat-rate exchange quote

Send us your part number, serial number and the condition you need, and we’ll quote flat-rate exchange and outright options so you can compare.

Taylor Mason, VP of Sales, Aerotex International
Phone: 469-293-3311 · Email: tmason@aerotex.net
For AOG orders, call 469-293-3311 directly.

For reference only. Always confirm part eligibility and procedures against the current IPC/CMM and your maintenance provider. This guide is general information, not regulatory advice. Always follow your approved maintenance data, your quality system and your regulator’s current guidance.

Need a part? Search by part number or send an RFQ.

AOGGrounded?