Embraer Legacy 600/650 Wheel & Brake Part Number Guide
Embraer Legacy 600/650 wheel and brake part numbers: 2-1699-2 and 2-1699-3 carbon brakes, 3-1551 nose wheel, main wheels, CMM refs and exchange options.
· 7 min read · Aerotex International
The Embraer Legacy 600 and Legacy 650 are business jet derivatives of the Embraer ERJ regional jet family. The Legacy 600 is based on the ERJ-135. Because of that shared design, many Legacy wheel and brake part numbers also appear in ERJ-135/145 parts listings, which can make searching for an Embraer Legacy 600 brake assembly confusing. You’ll find airline-focused listings, Embraer and Goodrich part numbers side by side, and several dash numbers that look nearly the same.
This guide lists the wheel and brake part numbers that published MRO and distributor sources show for the Legacy 600/650, explains what to check before ordering, and covers exchange, outright and AOG sourcing.
Important: The part numbers below come from third-party MRO and distributor listings, cited at the end. Effectivity can vary by aircraft serial number, model (600 vs 650) and service bulletin status. Always confirm against the current Embraer Illustrated Parts Catalog (IPC) before ordering or installing.
Legacy 600/650 wheel and brake part numbers at a glance
| Component | Part number(s) | Alternate P/N | Manufacturer | Listed fitment | CMM ref. (per shop listings) |
|---|---|---|---|---|---|
| Brake assembly (carbon) | 2-1699-2 | — | Goodrich (now Collins Aerospace) | ERJ-135/145, Legacy 600 & 650 | 32-49-10 |
| Brake assembly (carbon) | 2-1699-3 | — | Goodrich (now Collins Aerospace) | ERJ-135/145, Legacy 600 & 650 | 32-49-10 |
| Nose wheel assembly | 3-1551 | 145-26082-401 | Goodrich (now Collins Aerospace) | ERJ-135/145, Legacy 600 & 650 | 32-49-04 |
| Main wheel assembly | 3-1550, 3-1550-1 | — | Goodrich (now Collins Aerospace) | ERJ-135/145, Legacy 600 & 650 | 32-49-02 |
| Main wheel assembly | 3-1631-1 | — | Goodrich (now Collins Aerospace) | ERJ-135/145, Legacy 600 & 650 (per World Aero) | 32-49-09 |
Other numbers you may see on ERJ-family listings include the 2-1699-1 and 2-1699-1 OPT2 brakes, the 2-1582 series brake, and the 3-1622 nose wheel. Rotable Repairs lists these for the ERJ-135. Don’t assume they’re approved for your Legacy without checking the IPC.
2-1699-2 and 2-1699-3 brake assemblies
World Aero describes both the 2-1699-2 brake and the 2-1699-3 brake as carbon brakes for the Embraer ERJ135, ERJ145, Legacy 600 and Legacy 650. World Aero’s CAA capability list puts both dash numbers (along with 2-1699-1 and 2-1699-1 OPT2) under the same CMM, 32-49-10. Aeroval’s catalog record lists 2-1699-2 as a “brake assembly” from UTC Goodrich Wheel & Brake, CAGE code 97153.
What’s the difference between -2 and -3? We couldn’t find a published source that explains it. Dash-number changes on brakes often reflect design or service bulletin updates, and they’re not automatically two-way interchangeable. Before you accept a -3 for a -2 (or the other way around), check:
- The IPC entry for your aircraft serial number, including any interchangeability codes.
- Any applicable Collins/Goodrich component service bulletins.
- That both brakes on the axle pair are compatible, if your maintenance data requires matched units.
Carbon brake considerations
As carbon brakes, the 2-1699 series wears its heat stack rather than steel discs. For Legacy operators this means:
- Heat stack life drives cost. Overhaul quotes differ a lot depending on whether a new or refurbished heat stack is fitted. Compare quotes on the same scope.
- Wear indicators are checked during inspection, and the brake comes off when it reaches the limit in the aircraft maintenance manual.
- Flying profile matters. Number of landings and taxi practices affect how fast the heat stack wears.
3-1551 nose wheel
APSS lists the 3-1551 nose wheel as a Goodrich aluminum nose wheel assembly for the ERJ-135, ERJ-145, Legacy 600 and Legacy 650, with alternate part number 145-26082-401 (an Embraer-format number) and CMM reference 32-49-04.
APSS’s CMM-based maintenance outline for the 3-1551 includes:
- Eddy current / NDT at every tire change
- Overhaul on a tire-change-based schedule, at an interval set in the CMM (confirm the current interval with your wheel shop)
- Wear points: bearings, O-ring grooves and corrosion
- Any wheel that needs penetrant inspection is processed as an overhaul
At each tire change, the tire, preformed packing, valve cap and valve core are normally replaced. An overhaul adds further seals and packings.
Main wheels: 3-1550 series and 3-1631-1
World Aero lists the Goodrich 3-1550, 3-1550-1 and 3-1631-1 as main wheels for the ERJ-135/145 and Legacy 600/650. Its CAA capability list gives the 3-1550 series CMM 32-49-02 and the 3-1631-1 CMM 32-49-09. Rotable Repairs also lists Embraer-format main wheel numbers 145-20693-401, -403 and -405 for the ERJ-135, but doesn’t say which Goodrich part number each one matches.
The Legacy 650 has a higher maximum takeoff weight than the Legacy 600, so don’t assume the 600 and 650 use the same main wheel or brake dash number. Confirm effectivity by model and serial number in the Embraer IPC.
A note on the Praetor 500/600
The Embraer Praetor 500 and 600 belong to a different Embraer family from the Legacy 600/650 and should be treated separately. The part numbers in this guide shouldn’t be assumed to fit a Praetor.
How to search for Legacy wheel and brake parts
Because Legacy parts share numbers with the ERJ family, marketplace searches on ILSmart, PartsBase and similar platforms often bring back airline-sourced units next to business jet units. A few habits keep searches accurate:
- Search every known number. Search both the Goodrich number (for example, 3-1551) and the Embraer-format alternate (145-26082-401), since sellers may list under either.
- Include the full dash number. “2-1699” alone will return -1, -2 and -3 units, which may not be interchangeable for your aircraft.
- Ask for trace and history. Ask whether the unit came from airline or business jet service, and get the last shop’s work order along with the release tag.
- Confirm tire configuration. For wheels, check whether the unit is a bare wheel or a wheel-and-tire assembly, and which tire part number is fitted.
Exchange, outright or overhaul for Legacy wheels and brakes
Like other business jet rotables, Legacy 600/650 wheels and brakes are commonly supplied in one of these ways. Duncan Aviation is another source you may come across when sourcing them:
- On exchange: you get an overhauled unit now and return your removed unit as a core. Flat-rate exchange includes the core repair within set conditions. See Flat-Rate Exchange Explained.
- Outright: you buy the unit with no core to return. This makes sense if your core is damaged or you want a spare.
- Overhaul of your own unit: lowest direct cost, but the aircraft is down or flying on a spare.
To compare total costs, including downtime and core-charge risk, use our Exchange vs Outright vs Overhaul: Cost Guide.
What to check on the paperwork
- The part number and dash number match your IPC.
- Release documentation: an FAA Form 8130-3 for US-released work, plus dual release (e.g., EASA) if you need it. According to the FAA, an 8130-3 documents airworthiness status and traceability, but it isn’t approval to install on a particular aircraft.
- The condition code (OH, SV, NE) and what work was done.
- For brakes, the heat stack status. For wheels, whether the tire is included and its part number.
Frequently asked questions
What brake assembly does the Embraer Legacy 600 use? Published MRO listings show the Goodrich (Collins) 2-1699-2 and 2-1699-3 carbon brake assemblies for the Legacy 600 and 650 as well as the ERJ-135/145. Confirm the correct dash number for your serial number in the IPC.
Are 2-1699-2 and 2-1699-3 interchangeable? Don’t assume so. Check the Embraer IPC and any Collins service bulletins before substituting one dash number for the other.
What is the alternate part number for the 3-1551 nose wheel? APSS lists 145-26082-401 as the alternate part number.
Do the Legacy 600 and Legacy 650 use the same wheels and brakes? Several listings show the same part numbers for both. The 650’s higher takeoff weight is a good reason to confirm effectivity by model and serial number.
Are ERJ-145 wheels and brakes the same as Legacy 600 parts? Many part numbers are shared because the Legacy 600 is derived from the ERJ family, but not every ERJ part number is approved for every Legacy. Check the IPC.
Related reading
- Learjet 40/45/75 Wheels & Brakes Guide
- Flat-Rate Exchange Explained
- Exchange vs Outright vs Overhaul: Cost Guide
- 3-1545-1 Learjet 45 Main Wheel
Quotes and AOG support for Legacy 600/650
Aerotex International lists Embraer Legacy parts on ILSmart and PartsBase.
Taylor Mason, VP of Sales, Aerotex International
Phone: 469-293-3311 · Email: tmason@aerotex.net
For AOG orders, call 469-293-3311 directly.
For reference only. Always confirm part eligibility and procedures against the current IPC/CMM and your maintenance provider. This guide is general information, not regulatory advice. Always follow your approved maintenance data, your quality system and your regulator’s current guidance.
Need a part? Search by part number or send an RFQ.
