Embraer Praetor 500/600 Wheels & Brakes Guide: Parts, Part Numbers and Exchange Options
Praetor 500 parts guide for Praetor 500/600 operators: who makes the wheels and carbon brakes, known part numbers, brake-by-wire notes and exchange options.
· 9 min read · Aerotex International
The Embraer Praetor 500 and Praetor 600 are some of the newest midsize and super-midsize business jets flying, and that creates an odd problem for parts buyers. There’s far less published information about Praetor wheels and brakes than about older types like the Learjet 45 or the Legacy 600. Marketplace listings are thinner, fewer shops publish part-number pages, and many search results for “Praetor 500 parts” turn out to be generic catalog pages.
This guide is for maintenance directors, chief pilots and parts buyers who support Praetor 500 and 600 aircraft. It explains where the Praetor’s wheel and brake system comes from, what part-number information we could confirm from published sources (and what we couldn’t), what the carbon brake and brake-by-wire design means for parts planning, and how to source wheels and brakes on exchange, outright or through overhaul.
Important: Published part-number data for the Praetor is limited. Every part number below comes from a third-party listing cited at the end and must be checked against the current Embraer Illustrated Parts Catalog (IPC) for your aircraft serial number before you order or install anything.
Praetor 500/600 at a glance: why the Legacy 450/500 matters
Embraer introduced the Praetor 500 and Praetor 600 in October 2018, ahead of that year’s NBAA-BACE. According to Embraer’s launch announcement and contemporary coverage, the Praetor 500 is an enhanced derivative of the Legacy 450, and the Praetor 600 is an enhanced derivative of the Legacy 500. The changes Embraer highlighted were mainly range-related, including winglets, more fuel capacity and updated engines.
For parts buyers, the takeaway is simple: the Praetor family’s ancestry is the Legacy 450/500, not the Legacy 600/650. The Legacy 600/650 is built on the ERJ-135 regional jet platform and uses a different wheel and brake family, covered in our Embraer Legacy 600/650 Wheel & Brake Part Number Guide. Don’t assume any Legacy 600/650 part number fits a Praetor.
Whether specific Legacy 450/500 wheel and brake part numbers carry over unchanged to the Praetor 500/600 is something we could not confirm from published sources. Check the Embraer IPC for your serial number.
Who makes the Praetor’s wheels and brakes?
In 2008, Meggitt Aircraft Braking Systems (MABS) announced that Embraer had selected it to supply the wheel, carbon brake and brake control system for the then-new Legacy 450 and Legacy 500. Meggitt’s announcement described the package as:
- a 14-inch main wheel
- a carbon brake (described as a “two-pair carbon brake”)
- a six-inch nose wheel
- a brake-by-wire brake control system
Airframer’s supplier database lists Parker Meggitt Aircraft Braking Systems against the Embraer Praetor 500/600 program for main and nose wheels, carbon brakes and brake-by-wire systems, with the wheel sizes referenced to the Legacy 500. You may see both “Meggitt” and “Parker Meggitt” on listings and paperwork.
Meggitt’s own carbon brake program list names the Legacy 450/500 among its business jet applications but doesn’t list the Praetor separately, which is consistent with the Praetor being a Legacy 450/500 derivative.
Praetor wheel and brake part numbers: what we could confirm
This is the part of a Praetor guide that most buyers want, and it’s also where published data runs out fastest.
| Component | Part number | Manufacturer | Listed fitment | Source status |
|---|---|---|---|---|
| Main wheel assembly | 90011353 | Meggitt (Parker Meggitt) | Praetor 600 | One distributor listing; confirm in your IPC |
Notes on the table:
- 90011353. Pilot John, a parts reseller, lists Meggitt 90011353 as a “Praetor 600 Main Wheel Assembly.” It’s the only Praetor-specific wheel or brake part number we found in a public listing. One listing isn’t enough to publish as fact, so treat it as a lead to verify, not a confirmed fitment.
- Brake and nose wheel. We did not find a published Praetor brake or nose wheel part number we’d be comfortable printing. Before this section goes live, it should be filled in from the IPC or from Aerotex’s own inventory records.
If you’re holding a removed unit, the data plate is the most reliable starting point. Search the exact part number and dash number shown on the plate, not a number from a forum post or a similar-looking listing.
Carbon brakes and brake-by-wire: what it means for parts planning
Two design features shape how Praetor operators should think about wheel and brake spares.
Carbon heat stack drives brake cost
Like other carbon brakes, the Praetor’s brake wears its carbon heat stack instead of steel discs. In an overhaul, the heat stack is usually the biggest cost variable, so two quotes for the “same” brake can differ a lot depending on whether a new or refurbished stack is fitted and how much stack life you’re buying. When you compare exchange or overhaul quotes, ask:
- Is the heat stack new, refurbished or partially worn, and how much wear remains?
- Is the quote for an overhauled (OH) unit or a serviceable (SV) one?
- What does the exchange price assume about the condition of your core?
For background on how carbon and steel brakes differ in cost and wear behavior, see Carbon vs Steel Aircraft Brakes. For how wear indicators are checked, see Aircraft Brake Wear Pin Inspection. Always use the Praetor AMM for actual limits.
Brake-by-wire: not every braking squawk is a brake assembly
On a brake-by-wire system, the pilot’s pedal inputs are sent electronically to a brake control system, which commands the brakes. That means a braking-related fault on a Praetor may trace to control-system components rather than to the brake assembly itself. Troubleshoot using the Embraer fault isolation and maintenance manuals before you order a brake, and confirm exactly which line-replaceable unit (LRU) the troubleshooting points to.
Ordering the right part the first time is especially important on a type where spares are scarce.
How Praetor wheels and brakes are maintained
The general pattern for business jet wheels and brakes applies to the Praetor too, even though Praetor-specific intervals weren’t available to us:
- Wheels are inspected at tire changes, usually including nondestructive testing (NDT) of the wheel halves, and are overhauled on a schedule or when an inspection finds damage. Bearings, O-ring grooves and corrosion are common wear points on wheels generally. See our Business Jet Tire Change & Wheel Inspection Guide for the process.
- Brakes are removed when the wear indicator reaches the AMM limit, or for leaks or damage, and are overhauled to the brake CMM.
The governing documents are the Embraer AMM and the Meggitt/Parker component maintenance manuals (CMMs). Ask any shop which CMM and revision they worked to, and make sure that appears on the release paperwork.
Ways to source Praetor 500/600 wheels and brakes
Exchange
You get an overhauled or serviceable unit now and send your removed unit back as a core. On a newer type where factory-new lead times can be long, exchange is often the quickest way back in the air. Ask whether the exchange is standard, flat-rate or cost-plus, how long you have to return the core, and what happens if the core is beyond economical repair (BER). See Flat-Rate Exchange Explained and Core Charges, Core Returns and BER Explained.
Outright purchase
You buy the unit with no core to return. This suits operators building a spares pool for a Praetor fleet, or anyone whose removed unit is damaged.
Overhaul your own unit
Usually the lowest direct cost, but the aircraft is down unless you have a spare. Works best for planned removals.
OEM and service-center support
Embraer and its service network offer parts support programs for their business jets. Program names, coverage and terms vary, so check what your aircraft is enrolled in before you buy outside it, since some programs cover wheels and brakes.
To weigh these options on total cost and downtime, read Exchange vs Outright vs Overhaul: Cost Guide.
Searching ILS and PartsBase for Praetor parts
Praetor listings on parts marketplaces are sparse compared with Learjet or ERJ-family parts. A few habits help:
- Search the exact P/N from your data plate or IPC, including the dash number, and search any alternate number the IPC lists.
- Try Legacy 450/500 references too, but only to find candidates. Confirm effectivity in the IPC before buying.
- Send an RFQ even if nobody shows stock. Many suppliers don’t list every unit they can get, especially on newer types.
- Ask for photos of the data plate and release tag before you commit.
Our guide on How to Source Business Jet Parts Fast covers ILS and PartsBase search tips in more detail.
Paperwork to check before installation
- Part number and dash number match the Embraer IPC for your serial number.
- Release certificate. Overhauled units from a US repair station normally ship with an FAA Form 8130-3. The FAA says the form isn’t approval to install on a particular aircraft; eligibility is still your responsibility. If you operate outside the US, ask about dual release. See FAA 8130-3 Tag Explained.
- Condition code (NE, OH, SV) and the work actually performed. See Aircraft Part Condition Codes.
- Heat stack status for brakes, and the tire part number for wheels if a tire is included.
- Core terms if you’re buying on exchange.
Frequently asked questions
Is the Praetor 600 the same aircraft as the Legacy 500? Embraer launched the Praetor 600 as an enhanced derivative of the Legacy 500. Many systems are shared, but don’t assume every part number carries over. Check the IPC for your serial number.
Who makes the wheels and brakes on the Praetor 500 and 600? Meggitt Aircraft Braking Systems (now part of Parker, often listed as Parker Meggitt) won the wheel, carbon brake and brake-by-wire contract for the Legacy 450/500, and supplier databases list it for the Praetor 500/600.
What is the Praetor 600 main wheel part number? One distributor lists Meggitt 90011353 as a Praetor 600 main wheel assembly. We couldn’t confirm it from a second source, so verify it in the IPC before ordering.
Do Legacy 600/650 wheels and brakes fit the Praetor? No. The Legacy 600/650 comes from the ERJ-135 regional jet family and uses different wheels and brakes. The Praetor family descends from the Legacy 450/500.
Can I get Praetor wheels and brakes on exchange? Exchange units are offered by some suppliers, but availability is thinner than for older types. Send an RFQ with your exact part number and serial number.
Related reading
- Embraer Legacy 600/650 Wheel & Brake Part Number Guide
- Flat-Rate Exchange Explained
- Exchange vs Outright vs Overhaul: Cost Guide
- Carbon vs Steel Aircraft Brakes
- Aircraft Brake Wear Pin Inspection
- How to Source Business Jet Parts Fast
- Aircraft Part Condition Codes
- How to Read an IPC and CMM to Find Interchangeable Part Numbers
Get a quote or AOG support for your Praetor
Need a Praetor 500 or Praetor 600 wheel, brake or other part? Send us the part number from your data plate or IPC, your aircraft serial number, the condition you need and whether you want exchange or outright, and we’ll quote it.
Taylor Mason, VP of Sales, Aerotex International
Phone: 469-293-3311 · Email: tmason@aerotex.net
For AOG orders, call 469-293-3311 directly.
For reference only. Always confirm part eligibility and procedures against the current IPC/CMM and your maintenance provider. This guide is general information, not regulatory advice. Always follow your approved maintenance data, your quality system and your regulator’s current guidance.
Need a part? Search by part number or send an RFQ.
