Skip to content
Aerotex International logo

Resources / Aircraft guides

Learjet 31 & 55 Wheels & Brakes Guide: Part Numbers, Learjet 35 Commonality and Exchange

Learjet 31 brake assembly and Learjet 55 wheel guide: 5003096 brakes, 9543991-4 main wheel, 9544207 nose wheel, Learjet 35 commonality, PMA kits and exchange.

· 8 min read · Aerotex International

The Learjet 31/31A and Learjet 55 have fewer dedicated suppliers than the Learjet 45 or 60. But published parts listings show that many of their wheels and brakes share part numbers with the much larger Learjet 35 fleet. That’s good news for buyers. A Learjet 31 brake assembly or Learjet 55 main wheel may be easier to find on exchange than you’d expect, as long as you confirm the exact dash number for your airplane.

This guide lists the wheel and brake part numbers published sources show for the Learjet 31 and 55, explains where they overlap with the Learjet 25/35/36, and covers buying options, PMA parts and what to check before installation.

Important: The part numbers below come from third-party distributor and MRO listings, cited at the end. Learjet effectivity can vary by model, serial number and modification status. Always confirm against the current Bombardier/Learjet Illustrated Parts Catalog (IPC) before ordering or installing.

Learjet 31 and 55 wheel and brake part numbers at a glance

Component Part number(s) Alternate P/N listed Manufacturer Listed fitment CMM ref. (per shop listings)
Main wheel assembly 9543991-4 2394103-5 Goodyear (now Meggitt/Parker) Learjet 23, 24, 25, 31, 31A, 35, 36, 55 (confirm in your IPC) —
Brake assembly 5003096-4, 5003096-6 6600330-7 (for -4) Goodyear/ABSC (now Meggitt/Parker) Learjet 25, 31, 35/35A, 36/36A, 55 (per RFS) 32-43-32
Brake assembly 5003096-7 6600330-21, 6600518-003, 90002424-2 Meggitt Learjet 55 and 60 (per VSE) 32-43-32
Nose wheel assembly 9544207-4 2342003-077, 9544207-5 Meggitt Listed for Learjet 31, 35/36, 55 and others by Airparts Aero 32-46-14

Some notes on the table:

  • One main wheel across the classic Learjets. Proserv Aviation lists the 9543991-4 main wheel for the Learjet 23, 24, 25, 31, 31A, 35, 36 and 55, with alternate P/N 2394103-5.
  • The Learjet 55 brake question. Rapco Fleet Support (RFS) lists the Learjet 55 among aircraft with 5003096-4 and -6 brakes. VSE Aviation groups the Learjet 55 with the Learjet 60 on the 5003096-7. Both can’t be the complete picture for every airframe. Brake fitment on the 55 may depend on serial number or modification. Check your IPC.
  • Nose wheel dash numbers vary. The 9544207 family is used on many aircraft, and distributors disagree on which dash number fits which Learjet. See our 9544207 Learjet Nose Wheel page.

Why the Learjet 31 and 55 share parts with the Learjet 35

Learjet developed its models in families, and published listings show the landing gear wheels and brakes carried across several of them. For a buyer, that commonality has three practical effects:

  1. A bigger exchange pool. Shops that stock Learjet 35 brakes and wheels often hold the same part numbers you need for a Learjet 31. VSE, for example, keeps an overhauled exchange pool for the 5003096-4/-6 (listed for the Learjet 25/35).
  2. More surplus supply. As older Learjets are retired and parted out, wheels and brakes come onto the market. Many of these are sold as removed and need overhaul before use (more on that below).
  3. More room for mistakes. When one base part number covers several aircraft, the dash number is what separates a legal installation from a wrong part. Never order on the base number alone.

Learjet 31 and 55 main wheel: 9543991-4

Proserv Aviation lists the Goodyear 9543991-4 as the main wheel for the Learjet 31, 31A and 55, among other classic Learjets. Aeroval’s catalog record describes the 9543991-4 as a “wheel assy, main gear.” We didn’t find a published CMM reference or tire size for this wheel in the sources we checked, so get both from the IPC and the Meggitt CMM rather than a listing.

When you buy a 9543991-4 on exchange, ask whether it’s a bare wheel or a wheel-and-tire assembly, and which tire part number is fitted.

Learjet 31 brake assembly: 5003096-4 and -6

RFS states that its FAA-PMA brake kits fit “Learjet 31 model aircraft equipped with Goodyear ABSC brake assemblies 5003096-4 & 5003096-6.” The same kit is listed for the Learjet 25, 35, 35A, 36, 36A and 55. Proserv lists alternate P/N 6600330-7 for the -4, and BAS Part Sales lists the Goodyear 9550629 with 5003096-4 as an alternate.

We found no published explanation of the difference between the -4 and -6. Don’t assume they’re two-way interchangeable without checking the IPC and Meggitt service bulletins. Our 5003096 Learjet Brake Assemblies page compares the -4, -6 and -7.

PMA overhaul parts

The RFS-3096K “Hot-Pac” kit for the 5003096-4/-6 lists these Goodyear/ABS-equivalent parts:

Qty Goodyear/ABS P/N Description
2 5006425 Rotating disc
44 5006029 Wear pad
1 5005119 Wear pad
— GY 18A-15, 18B-7, 18B-9, 18B-15 Rivets
4 5011319 Swage tube

That parts list (rotating discs and riveted wear pads) suggests the 5003096 is a metallic disc brake, not a carbon brake. That affects how it wears; confirm the construction in the brake CMM. See Carbon vs Steel Business Jet Brakes.

PMA parts are FAA-approved replacement parts, but some operators, lessors or maintenance programs accept only OEM parts. When you buy an overhauled or exchange brake, ask which parts were used.

Learjet 55 wheels and brakes

For the Learjet 55, published sources show:

  • Main wheel: 9543991-4 (Proserv), the same as the Learjet 31 and 35.
  • Brake: 5003096-4/-6 (RFS) or 5003096-7 (VSE). Confirm by serial number in the IPC.
  • Nose wheel: 9544207-4 is listed for the Learjet 55 by Airparts Aero. Confirm the dash number in the IPC.

If you also operate a Learjet 60, read our Learjet 60 Wheels & Brakes Guide. The 60 uses a different main wheel (5011740) but is listed with the same 5003096-7 brake that VSE gives for the 55.

How these wheels and brakes are maintained

Wheels

At each tire change, the wheel is taken apart and inspected to the CMM. That usually means NDT at CMM-defined intervals, inspection of bearings, seals and bolt holes, and replacement of O-rings and valve parts. A wheel with cracks or corrosion beyond limits gets condemned. Older wheels with long service histories are more likely to show corrosion, so it pays to ask for the last shop’s findings.

Brakes

The FAA’s Aviation Maintenance Technician Handbook explains that many brakes have a wear indicator pin. Its exposed length shrinks as the linings wear, and the manufacturer specifies a minimum length. On the Goodyear brake described in the handbook, the pin is measured where it sticks out through the automatic adjuster nut. Use the Learjet AMM and the brake CMM for the actual procedure and limits. See our brake wear pin inspection guide.

Ways to buy

  • Exchange: an overhauled unit now, with your removed unit returned as a core. Usually the fastest option. VSE asks for the core within 14 days on its brake exchanges. Duncan Aviation is another source you may come across when arranging a Learjet 31 or 55 wheel or brake exchange. Compare terms with our Flat-Rate Exchange Explained guide.
  • Outright: no core to return. Useful if your core is condemned or you want a spare.
  • Overhaul your own unit: lowest direct cost, but the aircraft is down or on a spare.
  • As removed (AR): common for older Learjet parts. BAS Part Sales, for example, describes its as-removed 9550629/5003096-4 units as “not overhauled, formally inspected, or tagged.” An AR unit must go through a repair station before installation, so it’s a core or a project, not an AOG fix.

To weigh the options, see Exchange vs Outright vs Overhaul: Cost Guide.

What to check before you install

  1. Dash number matches the IPC for your serial number. This is especially important for the Learjet 55 brake and all nose wheels.
  2. Release paperwork: an FAA Form 8130-3 for US-released work, plus dual release if you need it. The FAA says the 8130-3 documents airworthiness and traceability but isn’t approval to install on a specific aircraft.
  3. Work performed and CMM revision on the release or work order.
  4. OEM or PMA parts in the overhaul, if your operation has a policy.
  5. Tire part number and whether the tire is included.
  6. Core terms on exchange, including BER charges.

Frequently asked questions

What brake assembly does the Learjet 31 use? Rapco Fleet Support lists the Goodyear/ABSC 5003096-4 and 5003096-6 for the Learjet 31. Confirm with your IPC.

Is the Learjet 31 main wheel the same as the Learjet 35? Proserv lists the 9543991-4 main wheel for both, as well as the 31A, 36 and 55.

What brake does the Learjet 55 use? Sources disagree: RFS lists the 5003096-4/-6, and VSE lists the 5003096-7. Check the IPC for your serial number.

Are PMA brake parts available for the Learjet 31 and 55? Yes. Rapco Fleet Support offers FAA-PMA overhaul kits for the 5003096-4 and -6.

Can I install an as-removed brake from a parted-out Learjet 35? Not as is. An as-removed unit needs inspection or overhaul and a release from a repair station first, and the dash number must be approved for your aircraft.

Related reading

Get a Learjet 31 or 55 quote or AOG support

Aerotex International has supported Learjet operators since 1994 and lists parts on ILSmart and PartsBase. Send us your part number, dash number and aircraft serial number.

Taylor Mason, VP of Sales, Aerotex International
Phone: 469-293-3311 · Email: tmason@aerotex.net
For AOG orders, call 469-293-3311 directly.

For reference only. Always confirm part eligibility and procedures against the current IPC/CMM and your maintenance provider. This guide is general information, not regulatory advice. Always follow your approved maintenance data, your quality system and your regulator’s current guidance.

Need a part? Search by part number or send an RFQ.

AOGGrounded?