Skip to content
Aerotex International logo

Resources / Aircraft guides

Learjet 60 Wheels & Brakes Guide: Part Numbers, Exchange Options and AOG Sourcing

Learjet 60 brake assembly exchange and wheel guide: 5003096-7 brake, 5011740 main wheel, nose wheel dash numbers, inspection basics and AOG sourcing tips.

· 9 min read · Aerotex International

The Learjet 60 and 60XR are still flying hard for charter operators, flight departments and owner-pilots. Many of these airframes have been in service for a long time, so wheel and brake support depends more on the overhaul and exchange market than on new parts from the factory. If you’re arranging a Learjet 60 brake assembly exchange, replacing a main wheel after a failed inspection, or trying to make sense of nose wheel dash numbers, this guide is for you.

It covers the part numbers published sources list for the Learjet 60, how these wheels and brakes are maintained, the ways to buy a replacement, and what to check before anything goes on the airplane.

Important: Part numbers and fitment here come from published MRO and distributor listings, cited at the end. Always confirm effectivity for your serial number in the current Bombardier Illustrated Parts Catalog (IPC) and the component maintenance manual (CMM) before you order or install.

Learjet 60 wheel and brake part numbers at a glance

Component Part number Alternate P/N(s) listed Manufacturer Listed fitment CMM ref. (per shop listings)
Brake assembly 5003096-7 6600330-21, 6600518-003, 90002424-2 Meggitt Aircraft Braking Systems Learjet 60 (VSE also lists Learjet 55) 32-43-32
Main wheel assembly 5011740 6600330-20 Meggitt Aircraft Braking Systems Learjet 60, 60XR 32-42-11
Nose wheel assembly 9544207-6 — Goodyear / Meggitt Learjet 60 (Proserv) 32-46-14
Nose wheel assembly 6032400001-003 Replaces 6032400001-001 and 9544207-5 (per Airparts Aero) Meggitt (Bombardier P/N) Learjet 60, 60XR (confirm in your IPC) —
Nose wheel assembly 9544207-4 2342003-077 Meggitt Listed for Learjet 60 by some sellers 32-46-14

Meggitt Aircraft Braking Systems is now part of Parker. Many of these wheels and brakes started out as Goodyear designs, which is why you’ll see “Goodyear,” “ABS” (Aircraft Braking Systems) and “Meggitt” on listings for the same part.

The Learjet 60 does not share its main wheel or brake with the Learjet 40/45/75, which use the Goodrich (Collins) 3-1545-1 wheel and 2-1579-2 carbon brake. See the Learjet 40/45/75 Wheels & Brakes Guide if you also fly those.

The 5003096-7 brake assembly

The brake most often listed for the Learjet 60 is the 5003096-7, part of the same 5003096 family used on the Learjet 25, 31, 35 and 55 (in other dash numbers). Proserv Aviation lists three alternate part numbers for the -7: 6600330-21, 6600518-003 and 90002424-2. It also notes that the brake is used with MIL-PRF-5606 hydraulic fluid. Jet Parts Liquidator describes it as a “Learjet 60 tri-metallic brake assembly.” World Aero’s capability list puts the whole 5003096 series under CMM 32-43-32.

VSE Aviation lists the 5003096-7 for both the Learjet 55 and 60 in its overhauled exchange pool. Other sources list different dash numbers for the Learjet 55, so if you run both types, don’t assume one brake fits both. Confirm by serial number in the IPC.

We have a dedicated page comparing the -4, -6 and -7: 5003096 Learjet Brake Assemblies.

Why steel brake wear behaves differently

The 5003096-7 isn’t a carbon brake like the Learjet 45’s 2-1579-2. That matters for how you fly and budget. Boeing engineers writing in AERO magazine explained that steel brake wear is roughly proportional to the kinetic energy the brake absorbs, so heavy-weight, high-speed stops wear steel brakes fastest. Carbon brake wear depends mostly on the number of brake applications. The taxi technique that’s best for one can be worse for the other. Our Carbon vs Steel Business Jet Brakes article covers this in detail.

The 5011740 main wheel

Proserv Aviation lists the 5011740 as the Meggitt main wheel for the Learjet 60 and 60XR, with alternate P/N 6600330-20. Its wheel-and-tire assembly is shipped with a Goodyear Flight Eagle 178K43-1 tire, with an 8130-3 and axle-ready. World Aero’s capability list calls the 5011740 a “Learjet main wheel” (CMM 32-42-11), and Rotable Repairs’ capability list names it as the Learjet 60 main wheel.

Proserv sells the 5011740 from an exchange pool. You buy an in-stock wheel at an exchange rate and send your serviceable core back. Outright is available on request. That’s a common model for Learjet 60 wheels.

Learjet 60 nose wheel: watch the dash number

Nose wheels are where Learjet 60 parts buying gets confusing. Published sources list three options:

  • 9544207-6: Proserv lists this dash number for the Learjet 60.
  • 6032400001-003: a Bombardier-numbered Meggitt nose wheel that Airparts Aero lists for the Learjet 60 and 60XR, saying it replaces 6032400001-001 and 9544207-5.
  • 9544207-4: listed as a Learjet 60 nose wheel by Jet Parts Liquidator and Airparts Aero, although other distributors list it for the Learjet 45 family and older Learjets.

The 9544207 family covers several dash numbers under one CMM (32-46-14, per World Aero), and it’s used on Learjet, Citation, Metro and Beechjet aircraft. The dash number decides what’s approved for your airplane. Read more on our 9544207 Learjet Nose Wheel page, and confirm your dash number and any supersedure in the IPC before ordering.

How Learjet 60 wheels and brakes are maintained

Wheels and brakes are rotable components. They come off the airplane, go through a repair station, get certified and go back into service, often on a different aircraft. Knowing what happens in the shop helps you read quotes.

Wheels

At each tire change, a wheel shop disassembles the wheel and inspects it to the CMM. That usually includes NDT (such as eddy current) at intervals set in the CMM, inspection of bearings, seals and bolt holes, and replacement of O-rings and valve parts. A wheel with cracks or corrosion beyond CMM limits gets condemned rather than repaired. We don’t give Learjet 60 intervals here because the Meggitt CMM controls them.

Brakes

The FAA’s Aviation Maintenance Technician Handbook explains that many brakes have a built-in wear indicator pin. As the linings wear, the exposed pin length gets shorter, and the manufacturer’s maintenance data sets the minimum length. On the Goodyear brake described in the handbook, the pin is measured where it sticks out through the automatic adjuster nut. Check the 5003096-7 against the limits in the Bombardier AMM and the brake CMM. Our brake wear pin inspection guide covers the basics.

A brake overhaul usually covers disassembly, inspection of the housing and pistons, replacement of worn discs and lining, seal replacement, and a pressure and leak test. PMA overhaul parts exist for some 5003096 dash numbers (Rapco Fleet Support offers kits for the -4 and -6); don’t assume the same applies to the -7. It’s fair to ask a shop whether it overhauls with OEM or PMA parts.

Ways to replace a Learjet 60 brake or wheel

1. Exchange

You get an overhauled unit now and return your removed unit (the core). For most Learjet 60 operators, it’s the fastest route. VSE, for example, asks for the serviceable core back within 14 days of its exchange. Duncan Aviation is another source you may see when arranging a Learjet 60 brake or wheel exchange. Exchange terms come in several forms:

  • Standard exchange: an exchange fee that covers a set amount of repair. Extra work is billed as “over and above.”
  • Flat-rate exchange: one price that includes your core’s repair, apart from exceptions like a beyond-economical-repair (BER) core. See Flat-Rate Exchange Explained.
  • Cost-plus exchange: a lower upfront fee with the actual core repair billed later.

2. Outright purchase

You buy the unit with no core to return. Outright makes sense if your core is cracked or condemned, or if you want a spare on the shelf.

3. Overhaul your own unit

Often the lowest direct cost, but the airplane is down (or flying on a spare) while the unit is in the shop.

4. As-removed or repairable units

You’ll also see Learjet 60 parts sold “as removed” (AR) from teardown aircraft. These units aren’t certified for installation. They need inspection or overhaul by a repair station first. They can be useful as cores but aren’t an AOG fix. Our aircraft part condition codes guide explains the labels.

Compare total cost, including downtime, in Exchange vs Outright vs Overhaul: Cost Guide.

What to check before you install

  1. Part number and dash number match the IPC for your serial number, particularly for the nose wheel.
  2. Release documentation. An FAA Form 8130-3 for US-released work, and dual release if you operate outside the US. According to the FAA, the form documents airworthiness and traceability but isn’t approval to install on a particular aircraft.
  3. Work performed and CMM revision on the 8130-3 remarks or the attached work order.
  4. OEM or PMA parts used in a brake overhaul, if your operation has a policy on PMA.
  5. Tire part number and whether the tire is included for wheels.
  6. Core return terms if buying on exchange: days allowed, condition requirements and BER charges.

AOG sourcing for the Learjet 60

A grounded Learjet 60 is usually waiting on a brake, a main wheel or a nose wheel that failed inspection. Some habits that save time:

  • Have the full part number, dash number and serial number ready, plus a data plate photo.
  • Search alternates. Sellers may list the 5011740 as 6600330-20, or the 5003096-7 under one of its Learjet-format alternates.
  • Check marketplaces. Learjet 60 wheels and brakes are listed on ILSmart and PartsBase, where Aerotex also lists inventory.
  • Agree on paperwork and core terms before the part ships.

Aerotex International is based in Lewisville, Texas, in the Dallas–Fort Worth area, and has supplied business jet parts since 1994.

Frequently asked questions

What brake assembly does the Learjet 60 use? Published listings show the Meggitt 5003096-7, with alternates 6600330-21, 6600518-003 and 90002424-2. Confirm in your IPC.

What is the Learjet 60 main wheel part number? Proserv lists the Meggitt 5011740 (alternate 6600330-20) for the Learjet 60 and 60XR.

Do the Learjet 60 and 60XR use the same wheels? Proserv lists the 5011740 main wheel for both, and Airparts Aero lists the 6032400001-003 nose wheel for both. Confirm by serial number.

Is the Learjet 60 brake carbon? Published listings don’t describe it as carbon. One seller calls the 5003096-7 a “tri-metallic” brake; confirm the construction in the brake CMM.

Does the Learjet 60 share wheels and brakes with the Learjet 45? No. The Learjet 40/45/75 use Goodrich (Collins) wheels and a carbon brake.

How long does a Learjet 60 brake exchange take? In-stock exchange units can often ship quickly. The core return window, such as VSE’s 14 days, starts after that. Ask your supplier about stock and shipping cut-offs.

Related reading

Get a Learjet 60 quote or AOG support

Need a Learjet 60 brake assembly on exchange, a 5011740 main wheel or a nose wheel? Send us the part number, dash number, condition you need and whether you want exchange or outright, and we’ll quote it.

Taylor Mason, VP of Sales, Aerotex International
Phone: 469-293-3311 · Email: tmason@aerotex.net
For AOG orders, call 469-293-3311 directly.

For reference only. Always confirm part eligibility and procedures against the current IPC/CMM and your maintenance provider. This guide is general information, not regulatory advice. Always follow your approved maintenance data, your quality system and your regulator’s current guidance.

Need a part? Search by part number or send an RFQ.

AOGGrounded?